Month: October 2012


Laminate Flooring


We had a busy and fun weekend, between picking up supplies 3 hours away, a Halloween party, and the Packer game.  We weren’t able to get much done, but we bought our flooring for the kitchen and dining room.  We wanted a dark floor to contrast the white cabinets and trim.  We went with a laminate flooring because we have had good luck with it in the past and the price is right (on sale for one day only). Of course, we unloaded our supplies at the house and Ryan brought the camera bag without the camera.  Luckily my cell phone has a camera, but the pictures are poor quality.  Here is a peek anyways:

 

We won’t be installing the flooring for a while because we have a bit of drywall work to do first.  We are even considering tearing out a wall in the dining room to insulate the exterior wall.  (One of those “Do it right, or do it later?” kind of projects.)   Hopefully we will have more updates soon, but bow hunting has been fighting for attention lately, so you never know.  Thanks for reading!

 

Please follow and like us:

Kitchen Counters


I can’t even believe the difference that counter-tops and appliances can make in a kitchen.  This weekend we made a trip to pick up some of our finishes and were even able to get some installations done.  Here is the new and improved kitchen:

 

We still need to install the sink and we haven’t put in our flooring yet.  Once we have our flooring in we can start on trim and the room will be done before you know it.  Since this room is so far along compared to the others, we will probably be switching gears and spending more time in the dining and living rooms.  We hope to have a lot of updates over the next couple of weeks, so stay tuned. Thanks for reading!

Please follow and like us:

Turning Up the Heat


Since we plan on moving in sometime in late December/January we are getting into crunch time. Our weekends are getting busy and we have A LOT to get done…fast.  We took care of some much needed jobs this weekend.  Since the snow has decided to come early this year, we are very lucky to have our furnace installed.  This weekend  we ran our hot water heater’s vent outside, some more heat ducts, and our bathroom fan vent into the attic and through the roof.  After we got all of the attic vents run we added R-30 insulation (10″ thick!) above the kitchen and bathroom.  You can see our new cross-beams for support and insulation here:

 

The furnace and water heater now have almost all of their ducts and vents run.  The furnace just needs one more elbow to connect the upstairs duct.  This is what the new equipment looks like:

 

Now that most of the work is done with the furnace, we worked on building it into a closet.  We were able to build the walls and put up drywall for the closet.  Now it just needs some drywall work and bi-fold doors.  It is located between the kitchen and dining room and took up a lot less space then we thought it would:

 

Lastly, while we were working on heat-related projects we cut a hole in the living room drywall to make room for our electric fireplace insert.  The insert will be under the stairs and will vent the air from our bedroom closet.  Here is a picture of Ryan in the closet cutting our hole:

 

The insert actually doesn’t take up much space at all in the closet, so we will still have quite a bit of storage space.  It isn’t done yet, but the hole is in the right place, just waiting for our drywall to be finished up:

 

We still have a lot to do, but now we have a warm house to work in and our pipes won’t freeze (fingers crossed).  Thanks for reading!

Please follow and like us:

How To: Choosing Appliances


I have spent many weeks researching appliances and trying to pick the one perfect for our kitchen.  After a lot of research I am happy to say we have finally made a decision.  If you are doing a kitchen renovation or just need new appliances here are a few things to think about:

 

  1. Make a list of your must-have functions.  Functionality is by far the most important part of kitchen appliances.  Paying an extra fee for extra features may be more important than having stainless steel if those features make your life easier.  However, if you don’t need a water and ice dispenser in your refrigerator, there is no need to pay extra for it!
  2. Before heading to the store, know how much space you have available.  Some appliances come in standard sizes, while others can vary a lot.  This is especially important if you need built-in appliances rather than free-standing ones.
  3. Decide what kind of energy source you will be using.  Many people have specific preferences about gas and electric ranges and stoves.  It is important to decide which you would prefer (everyone has different reasons), as well as what hook-ups are available in your home.
  4. Choose the finish you would like to match your kitchen style and your budget.  Most appliances come in multiple finishes and prices can vary.  If stainless steel is a must, you may have to increase your budget.
  5. Decide what brand you prefer.  The best way to decide what brand you prefer is research, research, research.  Even if you can narrow it down to a couple of brands to begin your in-store search it will help.  Read customer reviews and make sure you are getting what you really want.  Your appliances do not all need to be from the same brand, but you may get a package price if you stay within one brand when you purchase.
  6. Shop around.  Very few stores have every appliance on display.  Shop around for the appliances you want, at the price you want them.  You may find the perfect appliances at a store, but make sure they are giving you the best possible price.  Once you have chosen your appliances, bring the model numbers to other appliance stores and ask what kind of price they can offer.  Most appliance stores can special order appliances and many will quote a lower price than what you can find online, so go negotiate!

 

For me, functionality trumps finish and our budget is tight!  This automatically removes stainless steel from my options.  I shopped the big box stores as well as some local appliance stores to decide what functions and features I wanted.  Here is my list:

  • Large oven
  • Convection oven
  • French door refrigerator
  • No water and ice dispenser in refrigerator
  • About 22 square feet refrigerator/freezer space
  • Microwave with hood combination
  • Whirlpool Brand

I found my appliances at Lowes, but was able to negotiate a better price at our local appliance store.  Here’s what we chose:

 

Refrigerator:

http://www.whirlpool.com/-[GX2FHDXVQ]-1001363/GX2FHDXVQ/

 

Range:

http://www.whirlpool.com/-[WFE710H0AH]-1020890/WFE710H0AH/1021046/

 

Microwave:

http://www.whirlpool.com/-[WMH53520AH]-1021053/WMH53520AH/1021046/

 

 

While everyone has different preferences, research can make your appliance shopping much less stressful.  At first, I didn’t know where to start and just looked at the appliances available in the store in my price range.  Once I streamlined my search, it became so much easier!  Pick what works for you and spend the extra dollar if you have to.  You will be using these appliances a lot and it is important to like them.  Good luck!

 

Please follow and like us:

How To: Stripping Furniture


 

Refinishing furniture can be a very intimidating task, at least it was for me.  We have a beautiful fireplace mantel in our living room that had many layers of paint and even some sharpie marker on it.  I really wanted to strip it down to the original wood finish.  We set up the mantel outside where it was well ventilated and dove right in.

We decided to use a semi-paste stripping compound that would be able to penetrate the paint even on the rounded surfaces.  We purchased a wash-away compound, but decided to use mineral spirits instead of water.  Here is a step by step process and method we used:

  1. We started by applying the stripping compound to a relatively small area (no more than 4 square feet).  You will want to use a natural, but inexpensive paint brush for this task.  Tip: Apply the stripping compound liberally, especially in areas of detail!  It will make a big difference when it comes time to scrape.
  2. Let the compound soak for about 30 minutes.  When the paint has bubbled you are ready to begin scraping.
  3. There are a lot of different tools you can use during the scraping process.  We used a 2″ scraper for the majority of the work.
  4. After the large pieces of paint came off there were still some areas that needed more work.  We coated the area with stripping compound again and let it soak for about 10 minutes.
  5. After the paint looked ready and bubbled, we used steel wool to remove the remaining paint.
  6. Once the paint was removed we used mineral spirits to clean off any remaining paint particles and stripping compound.  
  7. If any imperfections remain, you can use a fine sandpaper before staining or painting.

We are very happy with the final product.  Soon we will add stain and install our mantel back in the living room where it belongs.  We hope you find this tutorial helpful and look forward to comments and feedback.  Thanks for reading!

 

Please follow and like us:

Please follow & like us!

RSS
Follow by Email
Facebook
Facebook
Pinterest
Pinterest
Instagram